GLEASON- PFAUTER P 1200 1600 S

•  
  Referans numarası 1058-24486

  Üretim Yılı 2009

  Çalışma Saati Uygulanabilir değil

• Satıcı

  EMUK GmbH Werkzeugmaschinen
  Siemensstraße 24a
  76316 Malsch

  Germany

  

• Ana Kategori

  Metal işleme makineleri

• Kategori

  Dişli kesme makineleri

• Makine tipi

  Dişli şekillendirme makineleri

• Makine Türü

  Dişli şekillendirme makineleri

• İmalatçı

  GLEASON- PFAUTER

• Kumanda

  Siemens 840D Powerline

• Teknik veriler

  max. wheel diameter

  1600 mm

  gear width

  600 mm

  table hole

  300 mm

  max. module

  24

  max. workpiece diameter

  2000 mm

  control

  Siemens 840D Powerline

  voltage

  400 V

  frequency

  50 Hz

  connected load

  150 kVA

  stroke

  650 mm

  table diameter

  1200 mm

  weight

  29,5 t

  table load

  15 t

• Tanım

  
  
  Gleason-PFAUTER CNC gear shaping machine
  for the production of internally and externally toothed
  cylindrical gears and other cylindrical
  regularly occurring cylindrical workpiece circumference
  profiles and moulds as well as for the production
  of profiles in the single part process.
  Special version (item 106):
  Hydraulic shaping head H2
  
  Working range and technical data:
  
  Nominal workpiece diameter . . . . . .1,200 mm
  Largest machinable diameter . .1,600 mm
  Largest workpiece circulation diameter .2,000 mm
  (without counter stand)
  Nominal machine module approx.
  with hydraulic shaping head H2 . . . . . 24 mm
  (Standard values depending on the respective
  machining task and the shaping head used).
  Shaping spindle stroke rate range/max. cutting speed
  with hydraulic shaper head H2 . . . .30 m/min
  Maximum toothing width
  with hydraulic shaping head H2 . . . . .600 mm
  Smallest pitch height of the hydrostatic
  screw guide
  with hydraulic push head H1/H2 . . 850 mm
  Smallest/largest distance between tool and workpiece
  workpiece axis (X-axis)
  with hydraulic shaping head H2 . . .0 - 970 mm
  Axial slide adjustment range (Z-axis)
  with hydraulic shaping head H1/H2 . .1,100 mm
  Lowest push spindle position above table
  with hydraulic shaping head H2 **) . . .660 mm
  **) with upper push stroke position
  Column side offset range
  with hydraulic push head H1/H2 . +/- 50 mm
  Mould mounting cone
  with hydraulic push head H2 . . . . HSK-100
  (hollow shank taper according to DIN 69063)
  Table top
  - Clamping diameter . . . . . . . .1,200 mm
  - Bore diameter . . . . . . . . .300 mm
  - Bore depth . . . . . . . . . . . .875 mm
  - Max. Load . . . . . . . . . 15,000 kg
  Weight of the machine approx.
  - with hydraulic pusher head H1/H2 29,500 kg
  The above-mentioned traverse paths and angles
  may vary depending on the workpiece and tool
  and tool dimensions, the gear cutting data and the
  the workpiece-dependent machine equipment.
  
  Translated with DeepL.com (free version)
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• Eyalet

  Kullanılmış