DMU 60 eVo (linear) (Reference-Nr. 040753)

•  
  Referans numarası 040753

  Üretim Yılı 2022

  Çalışma Saati Uygulanabilir değil

• Satıcı

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Ana Kategori

  Metal işleme makineleri

• Kategori

  İşleme merkezleri

• Makine tipi

  İşleme merkezleri (üniversal)

• İmalatçı

  DMG MORI

• Kumanda

  Heidenhain

• Tanım

  
  

  General
  Universal machining centre; Control: CELOS with Heidenhain TNC 640
  Technical Data
  Feed rate longitudinal/transverse/vertical	50000/50000/50000 mm/min
  Rapid traverse longitudinal/transverse/vertical	50/50/50 m/min
  Working area 1
  Longitudinal	600 mm
  Cross	500 mm
  Vertical	500 mm
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	60
  Max. tool weight	6 Kg
  Max. tool length	300 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	130 mm

• Şartname

  
  

  Spindle speed 20.000 rpm, HSK-A63	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Chain-type tool magazine 60 pockets	Tool magazine with 60 positions, chain type with double gripper (differently from standard)
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  NC swivel rotary table	NC swivel rotary table - direct measuring systems, - incl. cooling of the table
  	Table surface 600 x 500 mm
  	Centre bore 30 H6 mm
  	Maximum load (table centre) 400 Kg
  	Rotation Speed 5. Axis 60 rpm
  	5. Axes (swivelling range) -5/+110 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 60 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 7
  	Slot width 14 mm
  Preparation 3D Quickset	Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
  Infrared measuring probe TS460	Infrared touch probe make Heidenhain TS 460
  Laser tool measuring DIGILOG, swiveling	Laser tool measuring BLUM DIGILOG measuring of tool length and diameter, automatically turn away of the measuring unit under table level including Calibration tool
  Signal lamp 4-colour	Signal lamp, 4 colours
  Internal coolant supply 40 bar / 600l	Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon air purge for linear measuring system, bed flushing double cartridge filter 50µm for internal coolant
  Swarf conveyor, with cleaned slot screen	Swarf conveyor scraper type, with wedge wire screen and suction pump (recommended for high chip volume of aluminium and floating chips - no plastic swarf's!) (differently from standard)
  Mechanical Preparation Oil-mist separator	Mechanical preparation for connection of an oil mist separator on customer side opening in cabin ø200mm
  Air blast through spindle centre	Air blast through spindle centre selection with M function maintained air (1 Drop Oil per 8min) (in combination with ICS possible)
  Door drive for working area door	Door drive for working area door opening and closing via electrical door drive, incl. safety sensor for accident prevention, start opening and closing via button at the control panel. Remark: Not possible for automation!
  proTIME	proTIME Visualisation of remaining runtime, remaining workpieces and the machine state
  Sensor package i4.0	Sensor package i4.0: SGS Spindle Growth Sensor ICS flow sensor
  Free M-functions (M80-M88) for Heidenhain	Free M-codes (M80-M88) for Heidenhain NC-control potential-free on contacts inside electrical cabinet
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Special equipment	Heidenhain TNC 640 Gen. 3 with Saftey function

• Eyalet

  Kullanılmış